SPECIFICATIONS
| Model |
XFL-1325 Five-Axis Engraving Machine |
| Repeatability |
0.05mm |
| Processing accuracy |
±0.08mm |
| Working area |
1300mm*2500mm*500mm |
| A-axis travel |
±120° |
| C-axis travel |
±540° |
| Table structure |
T-slot table |
| Transmission type |
XY Rack,Z ball screw |
| Spindle power |
9.0kw air cooling spindle |
| Spindle speed |
0-24000r/min |
| Max.rapid speed |
20000mm/min |
| Max.processing speed |
12000mm/min |
| Control system |
SYNTEC |
| Tool Magazine |
Taiwan MACO turntable style tool magazine |
| Tool magazine capacity |
8 position |
| Drive motor |
YASKAWA Servo driver |
| Lubricating system |
Automatic lubricating system |
| Inverter |
Taiwan Delta |
| Reducer |
Japanese Harmonic reducer |
| Ball screw |
Taiwan TBI |
| Lead rail |
Taiwan PMI |
| Bearing |
Swedish SKF |
| Electric component |
French Schneider |
| Accessory |
Eight tools |
| Machine body |
Weld steel with annealing treatment |
| External dimension |
3000*4000*2700mm |
| Power source |
380V/3PH/50Hz(or customized) |
DESCRIPTION
The XFL-1325 is a true industrial grade CNC router that delivers exceptional cuts, consistent accuracy, and lasting performance. The XFL-1325 comes standard with a 4.2 HP HSD high frequency Automatic Tool Changing Spindle, a 5-Tool Rotary Carousel and YASKAWA servo system.
The advanced servo system provides accurate/correct positioning using feedback from encoders integrated into the motors to the controller and runs much more smoothly and with less resistance than a standard stepper motor setup. Since a closed-loop system provides feedback and control as well as short transient and free oscillation times, the servo system will not lose or gain steps.
The gantry mounted rotary tool carousel speeds up tool changes, increases cycle times and boosts production times.
The XFL-1325 is constructed with a welded steel frame and industrial quality precision bearings with hardened steel rails on each axis, giving it a smooth and rigid travel at top speeds.
The XFL-1325 open design gives the operator unrestricted access from multiple sides of the router.
The XFL-1325 is shipped completely built and tested from our facility in China and like all other Fala machines, the XFL-1325 comes pre-assembled, tested, and ready to run.
FEATURES
XFL-1325 machines come standard with:
4.2 HP (7.5 KW) HSD Automatic Tool Changing Spindle
5 Tool Rotary Carousel
Digital Servo System
Taiwan PMI Rails & Bearings on all Axis
Welded Steel Frame with Powder Coated Finish
Industrial quality electronic components
E Chain on all Axis
Dust Boot
Limit Switches on all Axis
Emergency Stop
Z Touch Sensor
Dual Drive on Y Axis
Taiwan Syntec Industrial Controller
Free Tech Support for the Life of the Machine
Free Remote Support Technician for the Life of the Machine
1 Year Warranty
ACCESSORIES
Vacuum Blower
Vacuum hold-down is one of the most effective methods to hold down parts for CNC cutting or machining. Universal vacuums are the standard vacuum hold-down blowers that are sold with Fala machines. When you purchase a universal vacuum, you will receive the vacuum blower plus the machine will come with all the necessary plumbing set up for a multi-zone system for your tool. In addition, the machine comes with a grided table top to provide for universal vacuum.
Dust Collection
Dust collectors are an important addition to workshops. Dust collection systems make shops cleaner, safer, and extend the life of a machine. Fala offers two-stage dust collection units. Two stage units work by drawing dust and debris into the system, but deposit the majority of the debris in the first stage collection container before entering the impeller. Two stage systems are more efficient and prevent decrease the chance of a fire or dust explosion from objects that can cause sparks.
Phase Converter
Phase Converters are a cost-effective and efficient means to start and run 3-phase vacuum blower motors on single phase power at 100% of their rated horsepower. Vacuum blower motors that operate on three phase electric power last much longer and operate much more efficiently than motors that operate on single phase power. Fala offers two types of phase converters. A Rotary phase converter and an Industrial T-3 Transformer phase converter.
Soft Start
A soft start is used with a 3-phase vacuum blower to temporarily reduce the load and torque in the power train and electrical current surge of the motor during startup. This reduces the mechanical stress on the motor and shaft, extending the lifespan of the blower.Fala offers Soft Starts' with motor overload protection in accordance with the National Electric Code.
Tooling
Sorting through router bit terminology and making selections from a seemingly endless variety of router bits can be confusing, especially if you are new to working with a router. There are a numerous types of router bits, including many designed for highly specialized applications. US Router tools is the preferred tooling company of Fala, Inc. You can contact them at http://xinfala.en.made-in-china.com
Why Customers Prefer Fala's CNC Routers?
Offering a solid line up of affordable CNC routing systems:
We have small to large machines with industry leading features offered at competitive prices!
Manufacturing machine for over 10 years in China:
We build quality made affordable CNC routers with a proven track record. You can be confident when buying the best CNC Routing System on the market, a Fala CNC Router!
China based knowledgeable technical support team:
Based in our manufacturing building - machines, parts, technical engineers and more are readily available to assist in resolving any routing question or concerns.
Join over 25,000 satisfied customers who own a Fala CNC Router:
Our CNC routers are the most rugged and reliable, low maintenance, low cost, in the market, our customer base continues to grow! Many of our original CNC machines are still in use today!
"The Fala System was lower in price compared to many others systems on the market. Before you do anything else - be sure to take a serious look at Fala. You won't be disappointed."
What applications can you make and materials you can work with on a Fala CNC Routing Machine?
Metal, Wood, Plastic, Leather, Glasses, Custom Signage, ADA Braille, Electrical Tags, Valve Tags, Dimensional Letters, Name Plates, Legend Plates, Control Panels, Asset Management, Parts Serialization, Parts Marking, Furniture, Cut-Outs, Parts Fabrication and More!
Privacy Policy: Fala Engraving & Routing Systems does not collect any other personally identifiable information that you do not expressly provide. We will never sell, rent or share your personal information, including your e-mail address, with any third parties for marketing purposes without your express permission.
Audited Supplier 
){kind=link}
){kind=link}